Specifications
- Product Type: Multi-Technology Transmission and Synchronization Tester.
- Ethernet Test Rate: Up to 10 Gb/s.
- Ethernet Interfaces: Dual SFP/SFP+ and dual 10/100/1000BASE-T RJ-45 interfaces.
- Supported Optical Ethernet: 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-T, 1000BASE-SX/LX/ZX/BX, and 100BASE-FX.
- Supported Electrical Ethernet: 10BASE-T, 100BASE-TX, and 1000BASE-T.
- Ethernet Testing: Traffic generation, throughput, frame loss, latency, QoS, BER, RFC 2544, ITU-T Y.1564, and RFC 6349.
- Traffic Generation: Up to 8 independent streams with continuous, periodic burst, ramp, and random bandwidth profiles.
- BER Testing: Layer 1–4 BER testing with PRBS patterns including PRBS11, PRBS15, PRBS20, PRBS23, and PRBS31.
- Protocol Analysis: Ethernet/IP traffic capture with hardware timestamping and PCAP/PCAPNG export.
- Capture Buffer: 256 MB with wrap-around support.
- Timestamp Resolution: 1 ns hardware timestamping.
- PTP / IEEE 1588: Master/slave emulation, Sync Analyzer, Boundary Clock, Transparent Clock, Slave Clock, and Dual Slave testing.
- NTP: NTPv3/NTPv4 client and server emulation with delay, asymmetry, jitter, and Time Error analysis.
- Synchronous Ethernet: SyncE generation and analysis with frequency offset, drift, TIE, MTIE, TDEV, and ESMC/SSM analysis.
- E1 Testing: ITU-T G.703/G.704 E1 generation and analysis at 2048 kb/s, including G.821, G.826, and M.2100 performance analysis.
- T1 Testing: ANSI T1.102/T1.403 T1 generation and analysis at 1544 kb/s, including G.821, G.826, and M.2100 performance analysis.
- IEEE C37.94: Dual-port generation and analysis with configurable rates from 64 kb/s to 768 kb/s.
- G.703 E0: Co-directional, contra-directional, and centralized interfaces from 48 to 256 kb/s.
- Jitter Analysis: 0.1 Hz to 100 kHz modulation frequency range with measurement accuracy better than ITU-T O.172.
- Wander Analysis: 1 µHz to 10 Hz modulation frequency range; TIE, MTIE, and TDEV analysis with 100 ps MTIE/TDEV resolution.
- Voice Frequency Testing: 2 Hz to 4000 Hz, with signal level measurement from −60 dBm to +3 dBm.
- GNSS Input: SMA connector; optional single-band or multi-band GNSS receiver.
- Oscillator Options: TCXO <±2 ppm, OCXO <±50 ppb, optional Rubidium <±5.0 × 10⁻¹¹.
- Display: 8-inch TFT color screen, 800 × 480 pixels.
- Remote Management: Web interface, SNMP, and VNC.
- Battery Operation: 5–8 hours with LiPo battery.
- Dimensions: 260 × 160 × 63 mm.
- Weight: 1.9 kg with dual battery packs.
- Operating Temperature: −10°C to +45°C.
- Storage Temperature: −20°C to +70°C.
- Environmental Protection: IP54 according to IEC 60529:2001.

