Specifications
- Product Type: Ethernet Tester
- Model / Part Number: Ether.Genius
- Primary Application: Installation, commissioning, and measurement of GbE, SyncE, PTP, T1/E1, 1PPS, ToD, IEEE C37.94, and Datacom services
- Main Functions: Layer 1 BER testing, Ethernet/IP testing, traffic generation and analysis, RFC 2544, ITU-T Y.1564, PTP testing, SyncE testing, T1/E1 testing, Datacom testing, C37.94 testing, E0 testing, clock monitoring, jitter/wander analysis and generation, pulse mask analysis, and latency testing
- Ethernet Interfaces: 2 × SFP, 2 × RJ45
- E1 Interface: BNC 75 Ω and dual balanced RJ45 120 Ω
- T1 Interface: Dual balanced RJ45 120 Ω
- Datacom Interface: Smart Serial universal DTE/DCE connector
- Ethernet Rates: 10 Mbit/s, 100 Mbit/s, 1 Gbit/s
- Supported Ethernet Interfaces: 1000BASE-T, 1000BASE-SX, 1000BASE-LX, 1000BASE-ZX, 1000BASE-BX, 100BASE-FX, 100BASE-TX, 10BASE-T
- Ethernet Standards: DIX, IEEE 802.3, IEEE 802.1Q, IEEE 802.1ad
- Jumbo Frame Size: Up to 10 kB
- IP Protocols: ARP, DHCP, DNS, Ping, Traceroute
- MPLS: Generation and analysis; double label stack support
- PTP Standard: IEEE 1588-2008
- PTP Packet Rate: Up to 128 packets/sec
- PTP Encapsulation: PTP over UDP/IPv4 and PTP over Ethernet
- PTP Standards: ITU-T G.8275.1, G.8275.2, G.8265.1 and power profiles
- Traffic Generation: Up to 8 independent streams
- Traffic Profiles: Continuous, periodic, ramp, random
- Traffic Filters: Up to 8 simultaneous filters
- RFC 2544 Tests: Throughput, frame loss, latency, jitter, back-to-back, recovery
- ITU-T Y.1564: Configuration and performance testing; CIR, EIR, policing, FTD, FDV, FLR, availability
- BER: Layer 1–4 BER count, seconds, ratio, and pattern loss seconds
- E1 Rate: 2 Mb/s
- E1 Line Codes: HDB3, AMI
- E1 Input Level: 0 dB to -45 dBm
- T1 Rate: 1544 kb/s
- T1 Line Codes: B8ZS, AMI
- T1 Input Level: 0 dB to -45 dB
- Datacom Interfaces: V.24/V.28, X.21/V.11, V.35, V.36 (RS-449), EIA-530, EIA-530A
- Datacom Rate: 50 b/s to 128 kb/s for V.24/V.28; up to 10 MHz for X.21/V.11 synchronous, V.35, V.36, EIA-530, and EIA-530A
- IEEE C37.94 Bit Rate: 64 kb/s to 768 kb/s in 64 kb/s steps
- E0 Rates: 48, 56, 64, 72, 128, 144, 192, 256 kb/s
- Voice Frequency Range: 2 Hz to 4000 Hz for configurable generation; telephone-band operation 300–3400 Hz
- Voice Frequency Sensitivity: -60 dBm for signal measurements; -80 dBm for noise measurements
- Jitter Generation Range: 1 µHz to 100 kHz
- Jitter Generation Amplitude: 0 to 1000 UIpp
- Jitter Measurement Range: 0.1 Hz to 100 kHz, 1 Hz to 100 kHz, or 10 Hz to 100 kHz depending on locking time
- Jitter Measurement Accuracy: Better than ITU-T O.172
- Wander Analysis Range: 1 µHz to 10 Hz
- Wander Sampling Frequency: 50 Hz
- Wander Amplitude: 0 to ±2 s
- Wander Amplitude Accuracy: 2 ns
- MTIE/TDEV Resolution: 100 ps
- Clock References: 1544 kb/s, 2048 kb/s, 1544 kHz, 2048 kHz, 5 MHz, 10 MHz, 1 PPS, ToD, Synchronous Ethernet
- Optional Internal Clock Reference: OCXO better than ±0.1 ppm; optional Rubidium reference
- Rubidium Frequency Accuracy: ±5e-11 on shipment at 25°C
- Rubidium UTC Time Accuracy: ±20 ns, 24 h locked to GNSS
- Display: 4.3-inch TFT colour, 480 × 272 pixels
- Remote Management: SNMP, VNC
- Storage: TXT, PDF, and CSV files
- File Transfer: SD card and USB port
- Battery: Li-Ion Polymer
- Battery Operation: Up to 24 hours in T1/E1 mode; up to 11 hours in Ethernet mode
- Dimensions: 223 × 144 × 65 mm
- Weight: 1.2 kg with rubber boot and one battery pack
- IP Rating: IP54
- Operating Temperature: -10°C to +50°C
- Storage Temperature: -20°C to +70°C
- Operating Humidity: 5%–95%
Resources
